A factory reset can be useful if you’re having persistent setup problems with your HP DeskJet 2910 printer, are preparing to give the printer to someone else, or want to clear its saved settings and start the setup process again.
Resetting a printer can remove wireless network information and other stored settings, so it’s a good idea to use a reset only when necessary.
In this guide, we’ll explain how to reset an HP DeskJet 2910 and what to do after the reset.
Before You Reset Your HP DeskJet 2910
A factory or network reset can erase saved wireless settings. After resetting the printer, you may need to reconnect it to your Wi-Fi network and add it again to your computer or phone.
If you’re resetting the printer because you’re experiencing a specific error, try restarting the printer and checking its connections first.
Step 1: Turn On the Printer
Make sure your HP DeskJet 2910 is connected to power.
Press the Power button to turn the printer on.
Wait until the printer has finished starting up before continuing.
Step 2: Check the Printer’s Control Panel
The HP DeskJet 2910 uses a simple control panel rather than a large touchscreen.
Because reset procedures can vary depending on the exact printer firmware and available buttons, avoid using a reset combination unless it is specifically listed for your printer model.
If you’re looking for the exact factory-reset procedure, check HP’s current support instructions for the HP DeskJet 2910 before proceeding.
Step 3: Reset the Printer’s Network Settings
If your main reason for resetting the printer is a Wi-Fi or wireless setup problem, you may only need to reset the printer’s network settings rather than perform a complete factory reset.
Resetting the network settings removes the printer’s existing wireless configuration and allows you to set up the Wi-Fi connection again.
After the network reset, use HP Smart to set up the printer again.
Open HP Smart on your computer or phone and select the option to add or set up a printer.
Follow the instructions to connect the HP DeskJet 2910 to your Wi-Fi network.
Step 4: Reconnect the Printer to Wi-Fi
After resetting the network settings, you’ll need to reconnect the printer to your wireless network.
Open HP Smart and select the HP DeskJet 2910.
Follow the setup instructions and select your Wi-Fi network when prompted.
Enter your wireless network password and wait for the printer to connect.
Once connected, the printer should appear in HP Smart as an available printer.
Step 5: Add the Printer Back to Your Computer
If you previously used the HP DeskJet 2910 with a computer, you may need to add it again after resetting the printer.
Windows
Open:
Settings → Bluetooth & devices → Printers & scanners
Select Add device and allow Windows to search for the printer.
Select the HP DeskJet 2910 when it appears and complete the setup.
Mac
Open:
Apple menu → System Settings → Printers & Scanners
Select Add Printer, Scanner, or Fax.
Choose the HP DeskJet 2910 and follow the on-screen instructions.
Step 6: Test the Printer
Once the reset and setup are complete, print a test page.
Check that the printer can communicate with your computer or phone and that the page prints correctly.
If the printer works normally, the reset and setup process is complete.
When Should You Reset an HP DeskJet 2910?
A reset may be useful if:
- You’re having persistent wireless connection problems.
- The printer won’t connect to your Wi-Fi network.
- You’re moving the printer to a different wireless network.
- You want to start the wireless setup again.
- You’re preparing the printer for another person.
However, a reset isn’t always necessary for common printing problems. Simple issues such as paper jams, low ink, or an incorrect print setting usually don’t require a factory reset.
What to Do If the Reset Doesn’t Work
If you’re still experiencing problems after resetting the printer, try the following:
Restart the Printer
Turn the printer off, wait a few seconds, and turn it back on.
Restart Your Router
If you’re experiencing Wi-Fi problems, restarting your wireless router may help restore the connection.
Reinstall HP Smart
Remove and reinstall HP Smart on your computer or phone, then try setting up the printer again.
Check Your Wi-Fi
Make sure your computer or phone is connected to the same Wi-Fi network that you’re trying to connect the printer to.
Check HP Support
If the printer still won’t reset or connect correctly, use HP’s official support resources for model-specific instructions.
Important: Factory Reset vs Network Reset
It’s useful to understand the difference between these two types of reset.
A network reset is mainly intended to clear the printer’s wireless configuration so you can set up Wi-Fi again.
A factory reset is a broader reset that can return the printer’s settings to their original configuration.
If you’re only experiencing Wi-Fi problems, resetting the network settings may be more appropriate than performing a full factory reset.
Final Thoughts
Resetting an HP DeskJet 2910 printer can help when you’re experiencing persistent setup or wireless connection problems. However, it’s important to use the correct reset procedure for your exact printer model and firmware.
If your main problem is Wi-Fi, resetting the network settings and setting the printer up again through HP Smart is often the appropriate approach.
After resetting, reconnect the printer to your wireless network, add it back to your computer or phone, and print a test page to make sure everything is working correctly.
