Loading paper correctly is an important part of setting up and using your Canon PIXMA TS4150i printer. If the paper is loaded incorrectly, you may experience paper jams, crooked prints, or paper-feed errors.
Fortunately, loading paper into the Canon PIXMA TS4150i is straightforward. In this guide, we’ll explain how to prepare the paper, load it correctly, adjust the paper guides, and select the correct paper settings before printing.
What Paper Can You Use?
Before loading paper, make sure you are using paper that is suitable for your printer and the type of document you want to print.
For everyday documents, standard plain A4 printer paper is a common choice. You can also use compatible photo paper and other supported media for photographs and specialist printing.
Always check the paper packaging for the recommended printer compatibility and paper settings.
Prepare the Paper
Before placing paper into the printer, take a moment to prepare the stack.
- Use clean, flat sheets of paper.
- Check that the sheets aren’t curled, folded or damaged.
- Fan the stack gently to separate the sheets.
- Tap the edges of the stack against a flat surface to align them.
- Don’t load different paper sizes or types together unless the printer specifically supports doing so.
Properly preparing the paper helps the printer feed individual sheets smoothly.
How to Load Paper in the Canon PIXMA TS4150i
Follow these steps to load paper into your Canon PIXMA TS4150i.
1. Turn on the Printer
Press the power button and wait for the printer to finish starting up.
Make sure there are no error messages displayed before loading paper.
2. Open the Paper Tray
Open the appropriate paper-loading area on the printer and prepare the paper support if necessary.
Extend the paper support or tray so that the paper has adequate support while it is being fed into the printer.
3. Adjust the Paper Guides
Move the paper guides outward so there is enough space for the paper.
Don’t force the guides against the paper before it has been loaded.
4. Place the Paper in the Tray
Place your prepared stack of paper into the paper-loading area.
Pay attention to the printer’s paper-loading markings and illustrations to ensure the paper is facing the correct direction.
For photo paper or other specialty media, check the instructions supplied with the paper because the printable side may need to face a particular direction.
5. Adjust the Guides
Slide the paper guides inward until they gently touch the edges of the paper.
The guides should hold the paper securely without squeezing it too tightly.
If the guides are too loose, the paper may feed at an angle. If they’re too tight, the paper may not feed correctly.
6. Check the Paper Stack
Make sure the paper is sitting flat and is properly aligned.
Don’t exceed the printer’s maximum paper capacity. If you’re loading a large amount of paper, it’s better to add smaller amounts rather than overfill the tray.
7. Select the Paper Settings
Depending on the paper you’re using and the print job, select the appropriate paper size and media type on the printer or in your computer’s print settings.
For example, if you’re printing on A4 plain paper, make sure the software is also set to A4 and the appropriate plain-paper setting.
Using matching settings helps the printer produce better results.
How to Load Photo Paper
If you’re printing photographs, use photo paper that is compatible with the printer.
Before loading photo paper:
- Check which side of the paper is printable.
- Separate the sheets carefully.
- Make sure the paper isn’t curled.
- Load the paper according to the printer’s loading instructions.
- Adjust the paper guides without pressing too firmly against the paper.
- Select the correct photo paper type and size in your print settings.
Using the correct media setting is particularly important when printing photographs because the printer may use a different amount of ink depending on the selected paper type.
How Many Sheets Should You Load?
Avoid filling the paper tray beyond its indicated capacity.
The exact amount of paper you can load can depend on the paper type and size. Always follow the capacity markings and the printer’s instructions for the specific media you’re using.
If you’re experiencing frequent paper-feed problems, try loading fewer sheets.
What to Do If the Printer Won’t Feed Paper
If your Canon PIXMA TS4150i isn’t picking up paper, check the following:
- Make sure the printer is switched on and ready.
- Check that the paper is loaded in the correct position.
- Make sure the paper guides aren’t too tight.
- Remove any damaged or curled sheets.
- Don’t overload the paper tray.
- Make sure the paper isn’t sticking together.
- Check the printer for a paper jam or error message.
- Confirm that the paper size selected in the print settings matches the paper you’ve loaded.
After making any adjustments, try printing a small test document.
What to Do If the Paper Keeps Jamming
Paper jams can occur if the paper isn’t loaded correctly or if unsuitable or damaged paper is being used.
If a jam occurs, stop the print job and follow the printer’s instructions for safely removing the paper. Don’t pull forcefully on a sheet if it is stuck, as this could damage the printer.
Once the jam has been cleared, check the remaining paper for creases or damage before loading it again.
Check Your Print Settings
One of the most common causes of poor print results is using paper settings that don’t match the actual paper.
Before printing, check:
- Paper size: For example, A4.
- Media type: Such as plain paper or photo paper.
- Print quality: Choose the quality appropriate for your document.
- Orientation: Make sure portrait or landscape matches your document.
Correct settings can help prevent printing errors and improve the finished result.
Frequently Asked Questions
Which way should I put paper in the Canon PIXMA TS4150i?
Load the paper according to the paper-loading markings and instructions on the printer. The correct orientation can vary depending on the paper type, so check the printer’s instructions and the paper packaging.
Can I use A4 paper?
Yes. A4 is a standard paper size commonly used for everyday documents. Select A4 in your computer or mobile print settings when printing on A4 paper.
Why is my paper feeding crooked?
Crooked paper can be caused by incorrectly positioned paper guides, an uneven stack, overloaded paper or damaged sheets. Remove the paper, realign the stack and adjust the guides so they gently touch the paper.
Why does my printer say there is no paper?
Check that the paper is loaded correctly and that the printer’s paper guides are positioned properly. Also check for any paper-feed obstruction or error message.
Can I load photo paper?
Yes, provided the photo paper is compatible with the Canon PIXMA TS4150i. Make sure you select the appropriate paper type and size in your print settings.
Conclusion
Loading paper correctly in the Canon PIXMA TS4150i is a simple but important part of getting good printing results. Prepare a clean, flat stack of compatible paper, load it in the correct position, adjust the paper guides and make sure your print settings match the paper you’re using.
If you experience feeding problems, start by checking the paper alignment, guides, paper condition and tray capacity. These simple checks can often resolve common paper-feed issues.
