Setting up a new printer can sometimes be confusing, especially if you want to connect it directly to your computer instead of using Wi-Fi.
The Canon PIXMA TS3750i can be connected to a computer using a USB cable, allowing you to print documents and photos directly from your PC or laptop.
In this guide, we’ll walk you through how to set up your Canon PIXMA TS3750i using a USB connection, install the necessary software and make sure your computer can communicate with the printer.
What You Need Before Starting
Before you begin, make sure you have:
- A Canon PIXMA TS3750i printer
- A compatible USB printer cable
- A Windows PC or compatible computer
- A working USB port on your computer
- Some paper for a test print
- An active internet connection for downloading Canon’s setup software and drivers
Does the Canon PIXMA TS3750i Come With a USB Cable?
Depending on the package and retailer, a USB cable may not be included with the printer.
If your printer didn’t come with one, you’ll need a compatible USB printer cable before starting the wired setup.
Step 1: Unpack and Prepare the Printer
Remove the Canon PIXMA TS3750i from its packaging and remove any protective tape or packaging materials.
Place the printer on a stable, flat surface close enough to your computer for the USB cable to reach.
Connect the printer’s power cable and switch it on.
Follow the printer’s initial instructions if prompted.
Step 2: Load Paper
Before installing the printer on your computer, it’s useful to load some paper so you can perform a test print later.
Raise the rear paper support and load a few sheets of compatible paper.
Adjust the paper guide so that it sits against the edge of the paper without squeezing it.
For standard documents, A4 plain paper is suitable.
Step 3: Download the Canon Setup Software
The easiest way to install the TS3750i on your computer is to use Canon’s official setup software and drivers.
Go to Canon’s support website and search for:
PIXMA TS3750i
Select the correct printer model and operating system.
Download the recommended setup software or printer driver for your computer.
It’s important to download the software from Canon’s official website rather than an unknown third-party driver website.
Step 4: Start the Printer Setup
Run the setup program you downloaded.
Follow the instructions displayed on screen.
The setup program will guide you through the printer installation process and may ask you which connection method you want to use.
When prompted to select a connection method, choose the option for a USB connection.
Step 5: Connect the USB Cable
When the setup program asks you to connect the printer, connect the USB cable.
Plug the appropriate end of the USB cable into the USB port on the Canon PIXMA TS3750i.
Connect the other end to an available USB port on your computer.
Make sure both connections are secure.
Don’t Connect the USB Cable Too Early
If the Canon setup program specifically tells you to wait before connecting the USB cable, follow those instructions.
In some installations, the software needs to be running before it detects the printer.
If you’ve already connected the cable, simply follow the instructions shown by the setup program.
Step 6: Allow Windows to Detect the Printer
Once the USB cable is connected, Windows should detect the Canon PIXMA TS3750i.
The Canon setup software may automatically identify the printer and install the required drivers.
Wait for the installation to complete.
Don’t disconnect the USB cable while the printer is being installed.
Step 7: Set the TS3750i as Your Printer
After installation,
